3. Installation — Little Navmap User Manual (2024)

Little Navmap for Windows is available as a 64-bit or 32-bit application and was tested withWindows 10 and Windows 11. You can download either an installer package or a Zip-archive.

Apple macOS is supported from macOS High Sierra 10.13 or later.You need Rosetta to run Little Navmap on Apple Silicon / M1 computers with theexception of Little Xpconnect which is available as a native X-Plane plugin.

Linux versions built on recent Ubuntu releases are available and should work on other distributions as well.

Each version of Little Navmap and the other programs come with a plain text file CHANGELOG.txtwhich has important notes and describes the changes between versions.


Do not install Little Navmap in the MSFS folder Community or in the X-Plane plugins folder.


Apple macOS users: Keep in mind that you have to clear the quarantine flag for Little Xpconnect on update. SeeClearing the Quarantine Flag on macOS.

3.1. Updating

Delete all installed files of a previous Little Navmap version beforeinstalling a new version or install into a new folder.All files from the previous ZIP archive can be deleted since settings are stored in separate directories.


In any case do not merge the installation directories since old files can cause problems.

There is no need to delete the old settings directory. The program iswritten in a way that it can work with old setting files and adapts these if needed. In some casessettings are reset to default if an updated version is installed.

See Files for more information about settings, database and cache files.

3.2. Windows

3.2.1. Builds

There are two builds of Little Navmap and Little Navconnect for Windows available:

  • Windows 64-bit: For MSFS and all X-Plane versions. Download file is LittleNavmap-win64-2.8.2.zip for example.

  • Windows 32-bit: For FSX and Prepar3D. Download file is LittleNavmap-win32-2.8.2.zip for example.

You can see the Windows build type in About Little Navmap and in the Window Title (64-bit or 32-bit).

Note that Little Navmap and all related programs are inter-operable across the network (Little Navmap and Little Navconnect)as well as the X-Plane plugin (Little Navmap, Little Navconnect and Little Xpconnect).

Also both versions share the same settings and databases. You can switch from one version to another without problems.

3.2.2. Installer

You can use the self-installing package based on Inno Setup to install Little Navmap on your computer.The installer packages are named LittleNavmap-...-Install.exe and contain the same programs and files as the Zip archives.

The installation process always installs the program for all users in a protected directory like C:\Programs.You can manually select another directory but I recommend to leave the default location.Both the 32-bit and the 64-bit versions can be installed in parallel.

There is no need to uninstall the program when updating.The installation process automatically detects the last selected directory and overwrites the current installation.

File types can optionally be associated with Little Navmap which allows to load a flight plan by doubleclicking on a LNMPLN file in Windows Explorer, for example. Little Navmap is either started or an already runninginstance is used to load the flight plan.

If both the 32-bit and the 64-bit versions are installed, the last installed version is associated to the file types.Change the association manually in Windows Explorer if needed.

Start menu entries for all included programs as well as the most important files and links are created.


There is no need to install or modify any files in the installation folder for thewebserver or map themes.

See Web Server for information how to change the root folder andMap Themes for information how to set the map theme folder and how to install additional mapthemes. Uninstall

You can uninstall Little Navmap by right clicking on the icon in the Windows start menu and selecting Uninstall.Alternatively uninstall Little Navmap from Windows settings or control panel.

The uninstaller asks to optionally delete all settings and databases created by Little Navmap after removing the main program.Files in directories like Documents\Little Navmap are not deleted.


Note that this step also removes the userpoint database as well as the logbook and cannot be undone.

The two folders which can be deleted are:

  • Settings and databases: C:\Users\YOURUSERNAME\AppData\Roaming\ABarthel

  • Online map cache: C:\Users\YOURUSERNAME\AppData\Local\.marble\data\maps\earth

3.2.3. Manual Installation

The manual installation of Little Navmap does not change or create any registry entriesin Windows and involves a simple Zip extraction of files.


Do not extract the archive into the directory c:\Program Files\ orc:\Program Files (x86)\ since this requires administrativeprivileges. Windows keeps control of these directories, therefore otherproblems might occur like replaced or deleted files.

There is no need to run Little Navmap as administrator.Adapt folder permissions if you have to export flight plans to protected places.

Extract the Zip archive into a directory like C:\Users\YOURNAME\Documents\Little Navmap orC:\Users\YOURNAME\Programs\Little Navmap.Then start the program by double-clicking littlenavmap.exe. Theextension .exe might be hidden in Windows Explorer depending onsettings. In that case look for a file littlenavmap having a lightblue globe icon 3. Installation — Little Navmap User Manual (1).

File types have to be manually associated to Little Navmap when using this installation method. Use Windows Explorer oranother file manager used on your operating system to do this. Uninstall

Simply remove the program folder.See Files for more settings, cache and database folders if you’d like to completely remove Little Navmap.

3.2.4. SimConnect

Little Navmap comes with a SimConnect library anddoes not require a separate installation of SimConnect.

3.2.5. Unblock Application

Depending on system and anti-virus settings it might be needed to unblock the executable files.This applies to Little Navmap (littlenavmap.exe), Little Navconnect (littleconnect.exe) and the Little Xpconnect plugin (win.xpl).

You can do this in the Windows explorer by selecting properties and checking Unblock file.Detailed instruction can be found here, for example:How to Unblock a File in Windows 10.

3.2.6. Improve Start-up Time

Anti-virus programs can significantly slow down the startup and executionof the program on Windows.

Therefore, it is recommended to exclude the following directories fromscanning:

  • Disk cache for map tiles:C:\Users\YOURUSERNAME\AppData\Local\.marble\data

  • Scenery library and userpointdatabasesC:\Users\YOURUSERNAME\AppData\Roaming\ABarthel\little_navmap_db

These directories do not contain executable files and are accessedfrequently by Little Navmap.

3.3. macOS

Extract the ZIP file and copy the Little Navmap application to thedirectory Applications or any other directory.


The menu entry which is referenced as Tools -> Options in this manualfor Windows and Linuxcan be found in the application menu at Little Navmap -> Preferences on macOS.

3.3.1. First Start on macOS

Note on first start on macOS: When starting the application you willget a message Little Navmap is from an unidentified developer. Are you sure you want to open it?.

The procedure may be slightly different depending on whether you’re using Big Sur or Catalina.

  1. Right or Ctrl-Click in the Finder on Little Navmap and select Open.

  2. You will see a dialog Little Navmap cannot be opened because it is from an unidentified developer. Click Ok.

  3. Go to System Preferences -> Security and Privacy. You will see a message mentioningLittle Navmap. Click Open Anyway.

  4. Next a dialog Are you sure you want to open it? pops up. Click Open.

3.4. Linux

Extract the archive to any place and run the executable filelittlenavmap to start the program from a terminal:


Most file managers will start the program if double-clicked.

A desktop file Little Navmap.desktop is included.You have to adjust the paths to use it. You must use absolute paths in the desktop file.

See the Little Navmap - Frequently asked Questions for help if the program does not start.

3.5. Additional Programs

The Little Navmap Zip archive contains two additionalfolders:

Little Navconnect: A complete copy of the program allowing remoteflight simulator connections for FSX, P3D, MSFS and X-Plane.

Little Xpconnect: This is the 64-bit plugin that is needed forLittle Navmap or Little Navconnect to connect to X-Plane. See Little Xpconnect for installation and usage.

3.6. X-Plane Plugin

Little Navmap can only connect to X-Plane using the Little XpconnectX-Plane plugin which has to be installed as well.

The Little Xpconnect plugin is included in the Little Navmap archive. You can always find thecorrect and matching version in your Little Navmap installation directory.

See Little Xpconnect for installation and usage.

3.7. Portable Execution

Running Little Navmap in portable mode instructs the program to place all settings, databases andcached files into the installation directory (i.e. the directory containing the executable file).No folders or files are created on the computer running the program from a memory stick, forexample.

You can also use the portable mode to test new Little Navmap releases without affecting yourcurrent settings.

Scripts allow to run Little Navmap in portable mode by passing certain command line options to the program:

  • Windows: Little Navmap Portable.cmd

  • macOS: Little Navmap Portable.command

  • Linux: Little Navmap Portable.sh

Three folders are created when running these scripts: Little Navmap Cache for the online map image tiles,Little Navmap Logs for log files and Little Navmap Settings used to store settings and databases.

See Command Line Options for more information.

3.8. Multiple Installations

Do not run more than one Little Navmap instances using the same settings folder in parallel. Thiscan result in crashes when accessing the databases.Running several instances is prevented by the program on Windows but not on Linux and macOS.

You can instruct Little Navmap to create and use a different settings folder by passing theparameter --settings-directory to the executable when starting up. This is supported for all operating systems.

This parameter instructs the program to use the given directory instead of ABartheland allows to have two instances of Little Navmap running with their own settingsand databases.

Note that this does not override the full path and spaces are replaced with underscores.


How to use C:\Users\YOURUSERNAME\AppData\Roaming\ABarthel-XP as a settings folder on Windows:

  1. Right click on the littlenavmap.exe file (extension might be hidden in Windows explorer) and select Create Shortcut.

  2. Right click on the newly created shortcut and edit the shortcut properties.

  3. Append --settings-directory ABarthel-XP to the path in the settings field separated by a space before --settings-directory.

  4. Click Ok.

3. Installation — Little Navmap User Manual (2)
3. Installation — Little Navmap User Manual (2024)
Top Articles
Latest Posts
Article information

Author: Rueben Jacobs

Last Updated:

Views: 5924

Rating: 4.7 / 5 (77 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Rueben Jacobs

Birthday: 1999-03-14

Address: 951 Caterina Walk, Schambergerside, CA 67667-0896

Phone: +6881806848632

Job: Internal Education Planner

Hobby: Candle making, Cabaret, Poi, Gambling, Rock climbing, Wood carving, Computer programming

Introduction: My name is Rueben Jacobs, I am a cooperative, beautiful, kind, comfortable, glamorous, open, magnificent person who loves writing and wants to share my knowledge and understanding with you.